Click for Glendinning Click for Lurssen Click for YFYS Click for Mag Bay Click for Abeking

Transom zincs

Discussion in 'Ocean Yacht' started by Ricky G, Apr 5, 2018.

You need to be registered and signed in to view this content.
  1. Ricky G

    Ricky G New Member

    Mar 28, 2018
    Chesapeake Bay
    Anybody know what size transom zincs go on a 2008 50SS?
  2. Capt Ralph

    Capt Ralph Senior Member

    Sep 8, 2004
    Satsuma, FL
    Assuming you do not know; To start, measure the distance between the inside studs.
    And, there should be a number stamped in the remaining metal plate.
    If you have an usual diver, he should know; If not, get a better diver.

    Remember to stay with bronze washers and nuts. Better divers know this also.

    Sorry to rag on divers. There are great divers who know how to service a boat, and then the wanna-bees who have not a clue.
    We have a great diving company working with us. I can tell you stories of others,,,,
  3. Tashmoo

    Tashmoo New Member

    Oct 24, 2016
    Cape Cod
    Is it a single stud, or 2 studs? If single stud, any 1/2" bolt-on plate will work. If it's 2 studs you need to know the on center distance between studs, as Capt Ralph said. Alternatively... there are multiple plates from mfrs like Divers Dream that make plates with horizontal bolt slots that will work with studs ranging from 2" to 9" center to center.