Click for Glendinning Click for Nordhavn Click for JetForums Click for Westport Click for Llebroc

RAYTHEON ANSCHÜTZ/Synapsis NX Workstation

Discussion in 'Electronics' started by croow, Sep 15, 2016.

You need to be registered and signed in to view this content.
  1. croow

    croow New Member

    Dec 21, 2011
    Dear Readers,
    I am in charge of a new build and the builder wants to use RAYTHEON ANSCHÜTZ/Synapsis NX Workstation for the bridge. I havent had any experience with these and was wondering whether anybody could enlighten me.
    I used Sperry marine Gyro with Transas Ecdis and Spery marine autopilot furuno radars.
    Now they recommend Synapsis NX Wstation ECDIS and Radar,
    RAYTHEON ANSCHÜTZ NautoPilot 5400,
    EML 224 Compact Dual Axis Water Track Log, Gate Valve (single hull),
    RAYTHEON ANSCHÜTZ Gyro/Gyro/Magnetic Compass system Standard 22

    I am also worried for charts on these as I was told that they are not so good for approaches to bays and that they are only accurate for port approaches.

    Any feedback would be appreciated.

    Thanks in advance.