Click for YF Listing Service Click for MotorCheck Click for Westport Click for Mulder Click for Perko

Raymarine RL 80C and radar

Discussion in 'Electronics' started by ArielM, Jul 14, 2011.

You need to be registered and signed in to view this content.
  1. ArielM

    ArielM Senior Member

    Joined:
    Jul 8, 2010
    Messages:
    179
    Location:
    Los Angeles
    I have an RL 70 and i have an RL 80. The RL 70 is my main radar (Radar scanner hooked up to RL 70) and the RL80 gets radar through HSB2. Now my RL 70 crashed on me today while on my way to the local island. I am trying to get things working again just for my trip so i hooked up the radar scanner cable directly to my RL80 (and just bypass the RL70 until i get home to repair). Problem is now my RL80 is getting a (No response from scanner.) ANy ideas? Is there a setting on the RL80 that i need to enable for it to LOOK for a scanner?
  2. Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,458
    Location:
    Sarasota/Ft. Lauderdale FL
    Maybe it's the scanner that is the issue, not the RL70?
  3. ArielM

    ArielM Senior Member

    Joined:
    Jul 8, 2010
    Messages:
    179
    Location:
    Los Angeles
    well i might have two issues but the issue with the RL 70 is that it freezes on start up. It freezes at the welcome screen with the "cat eyes."