Click for MotorCheck Click for Comfort Click for Nordhavn Click for Cross Click for Burger

Pump for Floating Dock

Discussion in 'General Yachting Discussion' started by LuvBigBoats, Jan 23, 2022.

You need to be registered and signed in to view this content.
  1. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,579
    Location:
    Vero Beach

    https://www.homedepot.com/p/DEWALT-...H-100-CFM-Tool-Only-DCE100B/206370245#overlay

    This is what I have aboard.
  2. LuvBigBoats

    LuvBigBoats Member

    Joined:
    Feb 9, 2016
    Messages:
    162
    Location:
    Los Angeles
  3. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,579
    Location:
    Vero Beach
    I use the nozzle reducer that comes with the kit. I first push the valve open to make certain it's free (not sticking) and then the force of air blows it open and fills the mega fenders etc.
  4. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,579
    Location:
    Vero Beach
    This photo includes the attachments that come with the blower. The center piece is what works well for me.

    Attached Files:

  5. LuvBigBoats

    LuvBigBoats Member

    Joined:
    Feb 9, 2016
    Messages:
    162
    Location:
    Los Angeles
    Interesting. Thanks
  6. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Just use a home depot pancake air compressor. You can set the regulator on one down to 10-12 psi and they'll run like that without blowing up. Also the grey round 120 volt pump that West Marine sells for toys/ribs works really well also.
  7. LuvBigBoats

    LuvBigBoats Member

    Joined:
    Feb 9, 2016
    Messages:
    162
    Location:
    Los Angeles
    Thanks but looking for a smaller foot print (re the pancake).
    The WM one looks interesting.
  8. Lunderic

    Lunderic Member

    Joined:
    Sep 6, 2018
    Messages:
    71
    Location:
    Oceanside, NY
    I use a West Marine Deluxe pump for inflatable with High Pressure floor. Does a great job and shuts off when set pressure is attained. I do use a small round pump for high volume low pressure.
  9. LuvBigBoats

    LuvBigBoats Member

    Joined:
    Feb 9, 2016
    Messages:
    162
    Location:
    Los Angeles
    I just received the Rave pump. Man that thing puts out gale force-level air!

    Still haven't figured out what I'm going to do to get it from 3--->10 psi but this thing will get to 3 in less than a couple minutes probably.

    Thanks for the recommendation.