Click for Mag Bay Click for Westport Click for MotorCheck Click for YF Listing Service Click for Perko

Post 50; Microwave Removal

Discussion in 'Post Yacht' started by Beau, Apr 28, 2013.

You need to be registered and signed in to view this content.
  1. Davidoc

    Davidoc Senior Member

    Joined:
    Aug 29, 2005
    Messages:
    242
    Location:
    Winter:Delray Beach, Fl Summer: Bahamas
    That's great! I'm glad you saw the platform. It is a reach on mine but its the only way I was able to get to the screw (s), There may only be one and then she will slide out the front. You will get it out now.
  2. captainscs

    captainscs New Member

    Joined:
    Feb 11, 2012
    Messages:
    16
    Location:
    key west
    I realize this is a late post to your question but it may help someone else. I have the last 50 made and to access the microwave mounting screws you remove the salon sofa that abuts the galley cabinetry and you’ll find an access cover. Remove that and you’ll be looking at the underside of the microwave.
  3. Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    thanks. You are exactly right. It only took this idiot a couple of weeks to figure that out. MV is attached to flat finished teak which itself is attached to the inside cabinet platform by screw thru the bottom up. Once those screws were removed, the whole thing just slid out! Attached a new MV to the board and slid it back in.