Click for Ocean Alexander Click for YF Listing Service Click for JetForums Click for Westport Click for Walker

Plastic vent cover for Chris Craft Constellation

Discussion in 'Chris Craft Connies, Commanders & Catalinas' started by Julie Seiger, Mar 24, 2021.

  1. Julie Seiger

    Julie Seiger New Member

    Joined:
    Feb 9, 2020
    Messages:
    4
    Location:
    Napa, CA
    We are missing one hard plastic vent cover that is on the outside of the boat above the deck (right below the Chris Craft emblem visible in the photo below)- we are missing just one.

    We are also looking to find wardrobe hinges for our cabin wardrobe.

    Thank you,

    Julie Chris Craft_vent missing.jpg
  2. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,210
    Location:
    Long Island, NY
    Good luck finding the vent cover for that beauty, Know anyone with a Glowforge? Seriously. The hinges you might be able to find if you scour some bone yards, but I think I'd just shop new hinges with vintage style.
    Julie Seiger likes this.
  3. Julie Seiger

    Julie Seiger New Member

    Joined:
    Feb 9, 2020
    Messages:
    4
    Location:
    Napa, CA
    Thank you NYCAP123! You are likely right- probably a 3d printer solve. I will post a detail of the piece JUST IN CASE :) :) :)
    As you can see, we also need to repair the Philippine mahogany on our left front window and some other areas. If you know of a terrific mahogany source, we'd appreciate any info!

    Attached Files: