Click for JetForums Click for Nordhavn Click for Mag Bay Click for Lurssen Click for Seacoast

Ocean Alexander flexable window molding

Discussion in 'Ocean Alexander Yacht' started by Scott Fewell, Jun 8, 2015.

You need to be registered and signed in to view this content.
  1. Scott Fewell, Jun 8, 2015
    #1
    Scott Fewell

    Scott Fewell New Member

    Joined:
    Jun 8, 2015
    Messages:
    1
    Does anyone know where I can purchase the flexable white molding used on the exterior of the Ocean?
  2. Capt J, Jun 9, 2015
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    12,511
    Location:
    Fort Lauderdale
    Have you tried calling Ocean Alexander?
  3. Richard C, Oct 7, 2015
    #3
    Richard C

    Richard C New Member

    Joined:
    Apr 8, 2015
    Messages:
    11
    Location:
    Apollo Beach Fl.
    I have a roll of the stuff the owner I bought the boat from had for my 1998 OA 440 Sundeck. The molding seems to be there just for aesthetics. With heating and cooling of the white rubber, it would work its way out of the channel and hang off the boat. My repair yard and I decided to just take it all off. It was not serving any purpose except holding water underneath the molding and looking bad. So, we have removed all of it and went about our day. All screws are water tight and with no molding on the boat, no one knows the difference.