Click for ITS Click for Shipyard Click for United Click for Nobiskrug Click for Westport

News: CCN 40M Motoryacht 'Panam'

Discussion in 'Unique, Custom or New Yachts' started by Yacht News, Jul 27, 2019.

Thread Status:
Not open for further replies.
  1. CCN 40-meter Motoryacht 'Panam'
    The CCN 40-meter 'Panam' has moved onto the next phase of construction, fitting out. The yacht is for a European owner and is expected to be delivered to them by the Summer of 2020. The design on the exterior is by Francesco Paszkowski and the interior is also by the same firm along with great touches from the talented Margherita Casprini.
  2. The interior will be primarily dark timbers on creamy and white tones. This combination lends to a sophisticated appeal with luxury being at the forefront. Onboard guests will find four cabins on the lower deck. The owner has a full-beam suite on the forward main deck. As expected, the crew have their own are on the lower deck with all they need to operate and sleep.
  3. Three MTU marine diesel powerplants are already installed on the lower deck and are expected to run this vessel up to 31-knots. There are several amenities onboard that guests will enjoy. On the aft lower deck there is a beach club which is supported by three shell doors (transom, port and starboard) that fold down to help open up the small area. Forward of here is another area serviced by a shell door. This is the garage for the vessel's 17-foot main tender. The transversely oriented garage is semi-floodable and allows the boat to 'sort-of' drive in and out. There is a fairly large flybridge/sundeck measuring approximately 65 square meters. You will find plenty of areas to sit and stretch out on and the center piece is a small-ish counter-current pool.

    For more information:

    Cerri Cantieri Navali
    Viale Zaccagna, 6
    54033 Avenza,
    Marina di Carrara (Massa Carrara, Italy)
    www.cerricantierinavali.it

    ***
Thread Status:
Not open for further replies.

Share This Page