Click for Lurssen Click for Walker Click for Abeking Click for Dockmate Click for ZF

mid to late 90's egg's

Discussion in 'General Sportfish Discussion' started by strongfinish, Feb 26, 2017.

  1. strongfinish

    strongfinish Member

    Joined:
    Jul 23, 2016
    Messages:
    37
    Location:
    NC
    I have done some searching and found little information regarding the 90's egg harbor's. I am interested in whether they were solid glass hulls? Were the topsides still cored? Super structure cored? I'm assuming still a mod-V hull?
  2. RER

    RER Senior Member

    Joined:
    Jan 20, 2009
    Messages:
    1,190
    Location:
    Newport Beach CA
    Which hull? They varied from 8 to 18 degrees. By the late 90's Egg Harbor was increasing dead rise at transom and adding prop pockets on some hulls. By that time as far as I know all were cored hull sides with solid fiberglass bottom. Again it depends on which hull specifically.

    I doubt you will find any production fiberglass boat without coring of some kind in the decks and house.
  3. strongfinish

    strongfinish Member

    Joined:
    Jul 23, 2016
    Messages:
    37
    Location:
    NC
    42' with 6-71
    I did manage to find where the hulls were cored, I kinda figured with a 25 knot cruise

Share This Page