Click for Westport Click for Shipyard Click for Alexseal Click for ITS

Joe's gear information

Discussion in 'Technical Discussion' started by hathandy, Jul 11, 2019.

You need to be registered and signed in to view this content.
  1. hathandy

    hathandy New Member

    Joined:
    Jul 3, 2018
    Messages:
    2
    Location:
    Seattle
    Any knowledge appreciated - I have two Joe's Gear Transmissions - running behind two Vivian (Canadian manufactured 4 stroke diesels) 6 cylinder each (6 3/4 bore by 10" stroke and cruising RPM 400 average to 500 max). Boat is a 1940 66' displacement hull - weight about 85 to 90 Tons)

    The Joe's gears ratios are one to one. I'm having issues with keeping one of the transmissions in reverse. I't seems to slip out of reverse even after adjustment. Adjustment is by adjusting toggles (one click at a time) inside the transmissions.

    Any thoughts or information on where to go for advice appreciated.

    Thanks

Share This Page