Click for Northern Lights Click for YF Listing Service Click for JetForums Click for YF Listing Service Click for Walker

Helm Window Framing Question

Discussion in 'Chris Craft Roamer Yacht' started by Alanglois, Nov 13, 2010.

You need to be registered and signed in to view this content.
  1. Alanglois, Nov 13, 2010
    #1
    Alanglois

    Alanglois Member

    Joined:
    Dec 1, 2004
    Messages:
    60
    Location:
    Mentor Harbor Yachting Club
    We have a '69 41' Regal that we are replacing the glass in the two fixed fwd helm windows and I'm trying to see if anyone has done this. I have some questions about the frame (is it structural as we would like to remove the individual parts and have re-anodized, how it is constructed and how was it sealed properly from the factory) Has anybody done this?

    Al

    The Kimberly Ann
    1969 41' Roamer Regal
  2. q240z, Nov 16, 2010
    #2
    q240z

    q240z New Member

    Joined:
    Oct 24, 2007
    Messages:
    285
    Location:
    zsedr
    Pix?

    Mine's an aluminum/steel frame and it is structural. I, too, have to remove it to replace the glass.
  3. Alanglois, Nov 16, 2010
    #3
    Alanglois

    Alanglois Member

    Joined:
    Dec 1, 2004
    Messages:
    60
    Location:
    Mentor Harbor Yachting Club
    Just found out that it is indeed structural and that removal necessitates the dropping or the headliner in the dinette and galley as well as the helm. These are the access points for fastening the frame pieces. I can replace my windows without removing the frame but I can't refinish the pieces of aluminum. We may attempt a painting solution or just buff them out. Also, it will be neccessary to brace the hardtop/bridge if you remove the entire frame.

    I have pics but they're too big and I just don't have time to reduce them just now. Will follow later.

    Al