Click for Furuno Click for Abeking Click for YF Listing Service Click for Mag Bay Click for Mulder

CABO 43 2003 WIRING DIAGRAM

Discussion in 'Cabo Yacht' started by KIKE GONZALEZ, Sep 1, 2021.

You need to be registered and signed in to view this content.
  1. KIKE GONZALEZ

    KIKE GONZALEZ New Member

    Joined:
    Oct 26, 2020
    Messages:
    1
    Location:
    Puerto Rico
    Any idea where I can get a copy of the wiring diagram of the CABO 43 FB 2003 - MANs D2848L403?
  2. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Good luck with that. What exactly are you trying to achieve? What issues are you having?
  3. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Sorry, I can't help with what you are looking for, but are you sure of the boat+engines model?
    I have the very same MANs on my 56 footer, and she reaches 33 Kts.
    Either there's something seriously wrong with the Cabo 43 if it takes 1600hp to move her around, or she must fly! o_O
  4. Ben Cooksey

    Ben Cooksey Member

    Joined:
    Oct 10, 2020
    Messages:
    45
    Location:
    Mobile AL
    43 with MAN 900’s. After running 5 weekend trips the 43 is very load dependent(like most boats). 1/4 tank fuel half water with 12 people the boat screams 28-29kts at 1925rpm only 72-74% load 3/4 tab. Fishing load with everything full including fish boxes 7 guys and 150gal bladder in cockpit 1850rpm 18-19kts 82-84% load full tab. Next trip Moved the bladder to the bow made a huge difference, same load on the boat but 25kts at 78% load. Definitely running the bladder up front now. Seas calm for all trips
  5. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    what does the boat turn WOT with full fuel, full water and 2 people? It sounds to me like your over propped? Should turn 2350 rpms WOT in the scenario I just mentioned. Usually they slow down that drastically if you're over propped.
  6. Ben Cooksey

    Ben Cooksey Member

    Joined:
    Oct 10, 2020
    Messages:
    45
    Location:
    Mobile AL
    Full fuel and water 5 guys not a fishing load she turns 2375rpm 33kts. 28x38 federals
  7. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Then you're right where you need to be. As for the wiring, what exactly are you looking for?
  8. leeky

    leeky Senior Member

    Joined:
    Jan 2, 2011
    Messages:
    381
    Location:
    Florida
    There are 2 guys discussing 2 issues in this thread. You addressed the speed issue for Ben Cooksey. The wiring issue is from the OP, KIKE GONZALEZ, in post #1. All aboard!:confused:
  9. MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,162
    Location:
    Windsor On. Canada
    Perhaps the mods could strip and separate this so the original op doesn't get lost?
  10. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale

    Kike Gonzales got lost a long time ago. He hasn't replied since his first post.