Click for Llebroc Click for Westport Click for Glendinning Click for CL Yachts Click for Lurssen

cabo 40 express

Discussion in 'Cabo Yacht' started by amen62, Mar 1, 2018.

You need to be registered and signed in to view this content.
  1. amen62

    amen62 New Member

    Joined:
    Mar 1, 2018
    Messages:
    1
    Location:
    Caribbean
    My cabo is powered by two caterpillar c12 engines. The starboard shut down while cruising. Subsequent investigation revealed electrical power going to the box located on the bulk head in the engine room controlling the ignition/engines. But no power leaving there to go to say the main electrical panel. Anyone has had a similar problem? Any suggestions what the problem might be?
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    10,062
    Location:
    Satsuma, FL
    There may be a breaker on the side of the box. Maybe a relay inside of the box. Any blink codes? Where is the ship now?
  3. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    10,062
    Location:
    Satsuma, FL
    You may have a local / remote key switch in the E R. Ensure this switck has power to it. Try key switch in either position .
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    10,062
    Location:
    Satsuma, FL
    They may be a breaker on the engine itself . Big red button.
  5. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    13,980
    Location:
    Fort Lauderdale
    Your description is pretty vague. Do you have a picture of this box? Also it could be the fire system shut down relays.