Click for Westport Click for Delta Click for YF Listing Service Click for Mulder Click for Northern Lights

Bertram 50 SF electrical problem.

Discussion in 'Bertram Yacht' started by sot, Jun 28, 2014.

You need to be registered and signed in to view this content.
  1. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Can you put a DVM over it and give us a resistive value?

    Also a report on how hot the new ones get after you install them?
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    S W, Delco and many others use a resistive swing. Mostly a shorted sender, the meter reads full or max. Generically called S W compatible.
    VDO Had a bass ackwards way to do it (short read empty).
    VDO offers both technologies these days.

    In these older boats, what direction did the VDO gauges swing?
  3. sot

    sot New Member

    Joined:
    May 24, 2014
    Messages:
    16
    Location:
    Houston TX
    rcrapps, the in voltage is 34v and the exit voltage is 14v just like the original one and yes, it gets very hot.
  4. SFS

    SFS Senior Member

    Joined:
    Oct 4, 2013
    Messages:
    122
    Location:
    Tampa
    I think he wanted a measurement of the resistance, rather than the voltage stepdown.
  5. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Yes please.
    ,rc
  6. sot

    sot New Member

    Joined:
    May 24, 2014
    Messages:
    16
    Location:
    Houston TX
    SFS, RC.
    Ok, I do not know how to get that information. I do have a multimeter, don’t know why but I have one, if you can tell me where to set the dial and what probe a put where I will get the information.