Click for United Click for Llebroc Click for JetForums Click for Walker Click for Dockmate

All Detroit Diesel Kids, need your engine data

Discussion in 'Engines' started by Capt Ralph, Mar 7, 2020.

You need to be registered and signed in to view this content.
  1. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,293
    Location:
    Satsuma, FL
    All Detroit Diesel Kids

    I’m finishing up my personal notes on Detroit 2 stroke tune parameters.

    I hope to combine this data and insert it into my final notes (maybe book).

    Please reply with your engine model, supposed tune HP, injector size or part number, turbo spec or part number and if bypass blower or not.

    I’m really needing air pressure readings after turbo and air box pressures at WOT.

    Lots of DDC owners do not have this data unless during a survey, If available, I can use this data.

    Any DDEC data if available is usable also.

    My personal trials are after air box pressures / HP tune. All data is appreciated.

    I will bump this tread from time to time to keep new members contributing.

    Thx

    Captain Ralph
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,293
    Location:
    Satsuma, FL
    Only looking for Real Life WOT / HP and if available GPH specs.. @ WOT..

    I’m on a Torque / Horsepower niche per air box pressure research trip for my self.

    I'm NOT looking for MPG values or cruise numbers. Looking for WOT / H P / GPH / Air Box Data Pressures.
    The final frontier ..

    We belch black smoke…

    71s Rule….

    And Thank you for your support...
    Last edited: Mar 7, 2020
  3. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,293
    Location:
    Satsuma, FL
    Also if known, Timing on your injector; 1.460", 1.484", 1.508" or 1.520".
    Thx.
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    12,096
    Location:
    Fort Lauderdale
    I ran a set of Covington 12v71 TI's and they had 120's with 1.46" injector height. Motors ran very good and extremely clean at cruise.
  5. PacBlue

    PacBlue Senior Member

    Joined:
    Jan 9, 2009
    Messages:
    1,865
    Location:
    Dana Point, Ca
    Ralph, you need to make a simple spreadsheet and attach it here so people can just fill in the boxes.
  6. Oscarvan

    Oscarvan Senior Member

    Joined:
    Nov 10, 2015
    Messages:
    636
    Location:
    Bethlehem PA
    Specifically a Google Spreadhseet.

    https://www.google.com/sheets/about/