Click for Westport Click for Ocean Alexander Click for Nordhavn Click for Westport Click for Mulder

89 Carver 4207 aft cabin

Discussion in 'Carver Yacht' started by Brian135, Mar 24, 2020.

You need to be registered and signed in to view this content.
  1. Brian135, Mar 24, 2020
    #1
    Brian135

    Brian135 New Member

    Joined:
    Mar 24, 2020
    Messages:
    3
    Location:
    Maple Ridge BC Canada
    My boat is equipped with an Onan MGKUB Genset. I'm trying to locate the fresh water pump to replace the impeller. Does anyone know where it is located..?
  2. NYCAP123, Mar 24, 2020
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
  3. Brian135, Mar 24, 2020
    #3
    Brian135

    Brian135 New Member

    Joined:
    Mar 24, 2020
    Messages:
    3
    Location:
    Maple Ridge BC Canada
  4. Brian135, Mar 24, 2020
    #4
    Brian135

    Brian135 New Member

    Joined:
    Mar 24, 2020
    Messages:
    3
    Location:
    Maple Ridge BC Canada
    Hi...thanks for this. My genset is equipped with a heat exchanger for salt water use. The pump in the specs you sent is for coolant. I'm pretty sure there is a remote pump that pumps seawater through the heat exchanger and I'm trying to figure out where it's located. Thanks so much for your help.
  5. Capt Cole, Mar 24, 2020
    #5
    Capt Cole

    Capt Cole Member

    Joined:
    Jan 24, 2017
    Messages:
    122
    Location:
    Pittsburg CA
    If you haven't located the raw water pump yet, just follow the hose from the thru-hull for the genset. It should lead you directly to the pump which will be mounted on the front of the motor and is driven by a belt.