Click for Nordhavn Click for Seacoast Click for Llebroc Click for Cheoy Lee Click for Abeking

46' Exhaust Box Replacement

Discussion in 'Chris Craft Roamer Yacht' started by J Moore Lewy, May 17, 2020.

You need to be registered and signed in to view this content.
  1. J Moore Lewy, May 17, 2020
    #1
    J Moore Lewy

    J Moore Lewy New Member

    Joined:
    Jul 28, 2019
    Messages:
    3
    Location:
    MDR
    I am restoring my 46' Steel Roamer and making great progress. It has 1978 454 Crusaders. One of the Steel Exhaust "boxes" is leaking -- i am going to take it out and try and weld it. Has anyone replaced these with modern fiberglass ones? If so what would be your recommendations?

    many thanks
  2. Capt Ralph, May 17, 2020
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,606
    Location:
    Satsuma, FL
    Exhaust box? Could it be the muffler?
    Chris used cast iron mufflers in the old Commanders. Wonder if this is what your looking at. Can you post a pic?
    Also pics of the area you have to work with.
  3. J Moore Lewy, May 19, 2020
    #3
    J Moore Lewy

    J Moore Lewy New Member

    Joined:
    Jul 28, 2019
    Messages:
    3
    Location:
    MDR
    yes muffler sorry about that! Has anyone replaced this with a modern fiberglass one, if so which one works best?
  4. Capt Ralph, May 19, 2020
    #4
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,606
    Location:
    Satsuma, FL
    The Glass mufflers will work better hands down. I did replace replace that Comander's Mufflers with glass tubes.
    Call these kids with the engine specs, size hose you want to stay with and area you have to work with.

    https://www.centekmarine.com/
    Great support and great to work with. Purchase directly or at West Marine.
  5. Capt Ralph, May 19, 2020
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    8,606
    Location:
    Satsuma, FL
    I'm not sure, I don't think that is stock. At least not for gas engines.