Click for Delta Click for Ocean Alexander Click for Abeking Click for Mulder Click for Westport

38/40 windshield and vinyl enclosure

Discussion in 'Luhrs Yacht' started by BigBadMachine, Aug 31, 2020.

You need to be registered and signed in to view this content.
  1. BigBadMachine, Aug 31, 2020
    #1
    BigBadMachine

    BigBadMachine New Member

    Joined:
    Aug 31, 2020
    Messages:
    17
    Location:
    Miami, FL
    Hi guys,

    I am currently rebuilding a 1998 38/40 open and about to start looking into adding a windshield and/or a full vinyl enclosure (Strata Glass).

    The boat has the tracks for the vinyl, but the old ones were not with the boat when I bought them. I wish I had the old ones to use as a template. I would appreciate any advice anyone has about doing them myself, or any referrals to good installers in the Tampa, Fl area.

    I was also toying with the idea of having a windshield installed as well, but I think this will be a much later project and just begin with vinyl.

    Any help/advice is appreciated.

    Thanks.
  2. NYCAP123, Aug 31, 2020
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Definitely not a DIY job. DK anyone local to you but my suggestion would be to pick out the best fitting job on your dock and ask them for a recommendation.