Click for JetForums Click for Delta Click for YF Listing Service Click for Mulder Click for Nordhavn

1995 carver 355 hot water heater R&R issue

Discussion in 'Carver Yacht' started by seldomdry, Apr 28, 2021.

You need to be registered and signed in to view this content.
  1. seldomdry, Apr 28, 2021
    #1
    seldomdry

    seldomdry Member

    Joined:
    Oct 10, 2012
    Messages:
    79
    Location:
    Stillwater MN
    My problem is it is under my dinette seat and I cannot figure how I can get this donr. There is no room to get it out! HELP
  2. NYCAP123, Apr 28, 2021
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    In looking at video of the boat I see a hatch between the dinette seats. Will it not come out through there? Failing that the entire floor is made up of panels. You can take up the panel next to the hatch. The bench is probably screwed to the panel below it, but other than being a bit heavy it should come right out once you unscrew. Then just lift that panel.
  3. seldomdry, Apr 28, 2021
    #3
    seldomdry

    seldomdry Member

    Joined:
    Oct 10, 2012
    Messages:
    79
    Location:
    Stillwater MN
    It will not fit through the hatch. My next step will be removing the dinette seat above and see what can be next. I am afraid the the entire dinette is one large mold.
    Thx for the advice captain..
    Last edited: Apr 28, 2021