List Your Boat Click for JetForums Click for Burger Click for Cross Click for Mag Bay

1/4 round replacement

Discussion in 'Chris Craft Roamer Yacht' started by jflongwell, Nov 26, 2011.

You need to be registered and signed in to view this content.
  1. jflongwell

    jflongwell Member

    Joined:
    Aug 27, 2008
    Messages:
    57
    Location:
    Watkins Glen on Seneca Lake
    The 1/4' round between the deck and the fiberglass has multiple leaks that I have been trying to seal with limited success. It appears I will have to replace it.

    What type of wood is preferred? Would a polymer be a potential material in place of wood? What would be the best sealant?

    I am planning to do this while it is under cover this winter.
    Thanks as always.
    John
  2. Caledonia

    Caledonia New Member

    Joined:
    Oct 30, 2006
    Messages:
    20
    Location:
    Saint Paul MN
    Caledonia

    I used mahogany, shaped to angle between deck and cabin fiberglass.

    I screwed into both deck and cabin surfaces and caulked with 3m 4000, liberally applied then extra cleaned off. Seems to have worked