Capt J, Was thinking about the issue. If the reading on my E120 was the same as the reading on the AP autopilot head wouldn't that mean the RC42...
No changes have been made to anything. Thanks guys will try to do an AP reset. Assume the process is in the manual. Thanks
My simrad autopilot with RC42 rate compass is connected to my E120 RM. Returning from the Bahamas my autopilot compass was not aligned with my...
Tom, I have misters in the cockpit if you would like to discuss. I've got 4 on the cockpit ceiling and one on port and one on starboard cockpit....
Thanks guys. Changed the response from factory default of 3 to 4 and will see how that goes. Will experiment next time out. Read the manual...
I replaced all G4 lamps two years ago with Hero Led's. Even though this is a China company the bulbs are very high quality. Never replaced one...
Tom, Yes definitely less expensive and no difference in performance. Skip
Back late last year when boat was painted in Palm Beach Gardens I decided to have the bottom and running gear painted while out of water....
Thank you will reduce the response from 3 to 2 and see how that does. Are the wind settings just for sailboats or how do they work? Read manual...
Recently, noticed that on auto mode it is not holding a straight line like it has in the past. When I went to Nav mode noticed the same thing but...
RC, He did not plug in anything other than to inject compressed air into the wastegates to see if any of them were stuck.
Update. Man mechanic checked the wastegates by blowing compressed air into them. He said that we should be able to hear the waste gates opening...
Capt J that is a great explanation. Is this example correct? If load factor was 80 running at 1800rpm and 75 at 1950 then my new load factor at...
Here's an update. Replaced all the K&N air filters and it definitely has improved the sooting issue. I cleaned them annually but I guess as...
Thanks Capt J just purchased some and will do that.
I recently had clear coat put over the top of Awlcraft 2000 on the transom only so soot would be easier to remove. Love it for that reason.
Never have put grease on shafts and props but heard of people doing it to supposedly keep marine growth off of them. Never use anti seize on my...
