Thanks for the reply. I was afraid you'd say that. Did you call Post ? I have not yet.
I know this is a pretty old thread but I wanted to ask Beau if he ever found the medium sized clam shell vent covers. 3 inches wide X 2 - 2/8 long...
As long as they are accessable without hiring a contortionist
I know they got alot or most of their fittings from Buck Algonquin. there is a pair of hinges for transom doors on their site in the deck hardware...
It is whats left of the backing of the carpet that was glued to the hull. I think for sound insulation. I used a vac and a wire brush to dislodge...
I have a 7.5 Onan. Mine is set well above the waterline in top of the fuel tank in the bilge. It's about 3 feet above the waterline to the pump...
I will look at the control wiring, since you mentioned it. The system has worked in this way for 23 years and I never questioned it. Edit: no...
Water pump comes on immediately on mine. Not wired in conjunction with the two compressors that it serves.
You are correct that the bilge water runs aft underway but it runs to the bow when the boat is at rest. The aft pump and red indicator light...
Before you buy a new breaker, maybe you can swap the two existing breakers and see if the problem follows the breaker or stays put. That might...
I have also had good luck with Proto in both the 1/4 drive sets and 3/8.
I think it's good to pick a size boat that is conducive to where you're going to spend most of your time too. Many places around me are not...
Instead of pulling the carpet, maybe drill a little hole ( carefully ) and use one of these:...
I watched that whole video. I wish I understood the captain. I did get about 5 " Fantasticos" and a " whoo hoo " when he got wet. And "Gracia...
both of my meters are below the steps. One is Genny one is Engine.
It may be possible that he was servicing the thruster. I can't imagine how the thing would be engaged otherwise. Sad no matter what. Nasty way to die.
That is cheap insurance if you've only got to do it every couple years.
The blower is located in the little storage closet . Mines got a flexible hose to a set of holes in the shower wall. My shower switch it high on...
If you leave the cushions on the seat all the time, water that gathers under them will create blisters. that means you need to stow them in the...
Last time I had a gasser and had that problem it was the exhaust manifolds rusting up and clogging. Mine were Chryslers, 360's I think, and the...
