Geez. What the heck was he doing so close to shore anyway... I had too look up where Corolla is but there are no inlets nearby so it wasn’t like...
Wth is this???
Wondering whether this is Epstein or Weinstein’s boat.... nah... way too small [ATTACH]
We do zincs at every oil change so I don’t carry them. Away from home I try not to do any maintenance unless it’s needed, always a risk of...
Belts, impellers, fluids, primary and secondary filters. I don’t carry a spare raw water pump for the C32s but I do carry both spare impellers...
The security zone has been lifted has authorities have determine the section as risk isn’t over the channel
Pantropic once charged me about $4k for an oil change on a pair of C32s... they call it flat fee. Never used them again. Southshore Cat Diesel...
$850 service call? What the hell did they do in 8 hours???? beside misdiagnosing the problem. Try letting the ECUs fully initialize (3 to 4...
2 to 3 days later is very rare... chances are he caught it before renting the car
Not enough flow at idle for filters to affect idle speed. Plus on electronic engines the computer regulates the speed.
3412Es don’t have mechanical tachs at the helm, they have the Cat displays getting data straight out of the ECUs. ER tachs May not show a small...
Most one way rentals need to start at a major airport. Much cheaper than shipping
I think the initialization of the ECUs is important but I m not a big fan of letting engines warm at idle too long. It take a while to get to 140...
You need a different mechanic ... johnson used Morse controls with the 3412Es not cat controls They should have zero impact on idle RPM. I really...
[ATTACH] [ATTACH] The installation manual recommends installing them amidship
We don’t. I talked to Trac a few years ago and they said the ones we have could be converted to zero speed but may not be as efficient as with the...
They could be further aft since it s shorter. Trac will be able to confirm the best location. The biggest issue is having enough height between...
whatever....
I don’t remember the exact layout of the 76. On the 80 and 84 the stabs are under the master floor, about a foot aft of the head
no it s not simplistic. The actuators have to come off and the holes have to be glassed. These gyro gales compressed air stabs are not a good...
