Hi, Welcome to Yacht Forums. Do you have any suggestions as to systems that have been proven to work in the 21st century? There are a...
Hi, Watch TV, or Surf the net and or make phone calls.
Hi, The ad was posted almost two years ago so if as intimated the Owner was in a hurry to sell it I doubt he still has it but one never knows...
Hi, Alan, You should be able to get any number of 24V Delco starters off land based equipment as 99% of it will have been 24V. Same goes for...
Hi, Were your engines customised by anyone such as Johnston Towers? I was looking for some pistons and liners a few years ago for a friend...
Hi, I met someone who had done Vancouver to Tahiti in the early 80's, theirs was a journey I would not care of partake of myself. The lack...
Is pretty close to what it actually says.( I adjusted your words a bit)
Hi, If redundancy is your target you need as many things to be backed up with an alternate arrangement as possible. I am aware of a project...
Hi, This might explain why the nut was not entirely super tight. Ill fit on the taper and a bit of out of balance could easily cause the...
Hi, Any thoughts on which of the mid sized states should be converted to the production of the corn? Might take a while to get it all...
Hi, As the failure seems to have been right at the end of the keyway this location might have been a good contributing factor if the keyway was...
Hi, Here is a good set of pics of how to do this properly and to check what you've done. Lap Fitting A Propeller To A Shaft Photo Gallery by...
Didn't it say it was in a canister on the side and looked like an oil filter? Failing this look for any plugs of over about 1/2" in the valve...
What is the conversion between this figure and ft/lb or Nm? :D I would imagine that en isn't the only thing being lightened with this little...
Hi, If you have access to it you could have someone copy it and build you one.
+1 for that book Hi, I have a 1982 edition of this book, what a great resource it was when I was first started in the business.
Hi, While searching for a news article about a bulk carrier that cracked its Prop shaft when sailing with a full load off the W Coast of NZ in...
Hi, Could be any number of reasons including a change in alignment that may be as a result of deterioration of mounts, worn bearings etc. If...
Hi, What exactly does that comment mean? There are many other postings elsewhere on here in many threads , just not in the thread on this...
Hi, don't believe 100% of everything you read on the Internet.
