When you apply 12V to it does the valve move? If the 12V is constant to the pins at all times it might be because the control switching is done...
It is not as easy as it was 10 or more years ago. There are now certain STCW Courses that most will need you to complete before stepping onboard,...
It was not built as a chase tender. It ran with 3 crew and a semi permanent day worker I saw her anchored off the Monaco Show in 2012, I...
The performance was good although it could be a bit lumpy when giving it some juice when going astern as one would expect with Cleaver Type Props....
You can anchor out in a lot of places, you just need to be aware of any local requirements and or restrictions that apply.
Sonny Levi has been doing ti for a long time and his drives have set trans Atlantic speed records http://www.levidrives.com/ I have been on a...
It reduces the clutch oil pressure allowing the clutch to slip so you can run slower than fully clutched in at idle. On the ones I have...
Flow Scan is one manufacturers brand, there are others that work as well to chose from.
There was a discussion about this on Facebook the other day. These things were very well thought of and popular. They are available in the US as...
Can you still have Halon on a yacht?
RPM has an effect on Voltage that is why when a heavy load is suddenly applied the voltage will drop till the engine catches up and when a sudden...
I am guessing your Genset is 60hz. If the frequency fluctuates this might indicate a speed change. A voltage change at constant speed could be an...
Does the frequency fluctuate at the same time?
No worries then
I posted that because if the OP thinks he lost refrigerant he either lost the plot on what his engine did and or doesn't know **** from shoe...
Its of one of the first Series 2 3516's used on a yacht. I have recently heard of a quote to clean a pair of them from a CAT Dealer in Fl at...
Really? Get someone who knows what they are doing and what to look at to help you.
You will do the same with one today as you would have done 50 yrs ago, point it at a heavenly body you can identify ,record the observed altitude...
I know , That's where I first saw them. Our project has been running for a while now so maybe things have changed but that was the answer 12...
I tried to get these used on an H and H plant. The answer was a firm NO. To many problems and too easy to damage by untrained folks adding gas...
