Viking has always built a well built boat. I'm not familiar with the 35' but it should be a good choice. Visibility from a lower helm is...
Actually, nothing of any substance should grow inside the tube. In order for growth you need waterflow or current, and sunlight. I don't see any...
Thats all well and good, but it takes a long time to make a major course change happen on a 280' barge
Return the seals from where you bought them, drop the shaft and replace the entire assembly with a PSS brand or other. On another note, if a...
Interesting. The tube is going to have more resistance then the smaller diameter shaft, but it also is going have less resistance because the...
I've bought those seals for a Cabo before and that was the only boat manufacturer I've run across that used that brand. Yes, the seal is $180 and...
The prices on electronics like a handheld GPS like that Garmin are pretty much the same from store to store.......Outdoor World in Dania Beach, FL...
I agree, I would say to take that chart, run the vessel and see if it achieves the same cruising speeds (which I doubt after so many years, boats...
The 48 is essentially a stretched 41' and you gain a stateroom and more room. I've never rode on one, but heard they're a little wet and usually...
I would say paint it in a bright white, I worked on a 97' steel MY with a canoe stern and it looked nice in bright white and it really accentuated...
Floscans only work well, once they are calibrated. I've found that most heavy boats with 454's will burn around 40 gph at 3200 rpms......closer...
I agree, also Cutlass bearings come with a brass outer shell usually. If the old ones take a lot to remove chances are the new ones will fit...
You can plug a 50amp 120VAC into a 30amp 120VAC with an adapter with no ill effects as long as you don't use more then 30amps on the boat and do...
What Pascal is trying to say is that usually a barge (on inland waterways will have RIGHT OF WAY because it falls into one of the above...
The Dania Marine Flea Market is always a nice place to walk around and look at nautical stuff. There is a lot of junk, but also some jewel's....
He's talking about a cold molded hull. They are quiet, strong, light, and the boats run well/ride well, and are fast.
Yachtpath- based out of Palm Beach specializes in shipping yachts on deck. As does Seven star
Call Cabo with your hull number and speak to the parts department and they can look up exactly what system your hull has. They'll also have the...
Why would you need to do anything to the teak? It doesn't hurt teak to remain bare. If you can't get to it to refinish it, you most likely won't...
That's not true. It is legal to pump overboard in international waters. So off of South Florida anything more then 3 miles and you can legally...
