UPDATE: the Orange gojo did not seem to do much of everything. All of the IMAR products are endorsed by Stamoid I used the IMAR...
It's a pretty straight foward swap out. The unit will have a tag on it with the serial number and model number. Dometic is located in Pompano...
It's not just the product, it's mainly the painter and the prep work that determines the final product as well as the weather. There are a lot of...
Yes, however most of the marina's are not suited for liveaboards.....ie. they don't have shorepower and such, they're mostly geared to smaller boats.
Those Vikings tended to run very stern heavy. If you cannot install a larger tab. I have had Aluminum blocks made that went between the ram and...
Another thing I can add. Whatever paint you decide to go with, choose the painter that uses it as their main go to paint, or the one they use 90%...
Wipe the oil pan with a diapher, make sure everything is clean and use a mirror. I just had to change the oil pan on one of those engines and it...
So far one of my detailers has told me to use Orange Gojo with pumice degreaser with a majic eraser. I have bought the 3 different IMAR...
In rare cases the rubber part of the impellor could break free from the bronze hub it is molded to. The bronze hub will spin, but the rubber...
I have not heard of Hatteras Yachts using Alexseal, I'm not saying it is not true. When I was at the factory they were using Awlgrip which was...
You're going to have to haul the boat to change the impellor. You're going to have an impellor in the lower unit of the outdrive. Change both...
dead algae in fuel tanks is always in the bottom just like in the racor bowls.
The fuel tank pickups always pickup fuel from the bottom of the tank, algae grows on the sides of the tank and in the fuel itself. When the fuel...
I've run both a 50' Hatteras and 2-54' Hatteras. I've also run just about all the different sportfish over the years. The 50' was a 2004 with...
Again, I wouldn't bother polishing the fuel. Buy extra filters, put the Diesel kleen additive in there and run it as low as you can. Polishing...
+1. Take both transmission lines off of the cooler, block the one line, pump the otherside up with air and see if it's leaking.
I'd like to stay away from Clorox as I know it does shorten the lifespan of the stitching.
Down here in South Florida on the ICW and waterfront you see not a lot, but a fairly good amount of luxury homes going up. Remember the ultra...
I am managing a boat that has a lot of Stamoid white canvas covers on everything. So far I've been using either Rolloff or Krud Kutter when...
