Call the Cabo parts department, they should have them in stock. If you go with too heavy, it will tear the mounting brackets or their hardware...
I was wondering if anyone else has come across any defective Jabsco macerator pumps recently? I am on a trip on a yacht and the new Jabsco 24...
Your first post has a totally different tune. And, it talks about someone taking a functioning boat and making it non-functioning to claim not a...
If they are frozen and you have concerns regarding their structural integrity just change them. The seacocks are pretty cheap.....however the...
There have been issues in the last few years in ANtigua and St. Maarten, if you do a search here, you'll find the threads. But nothing wide spread
It sounds like the helm is bad and bypassing the hydraulic fluid rather than pushing it one way or the other. Some helms have a part in them with...
I misread which was used on which side, but depending on what you want to achieve as long as it stays within manufacturers specs. The smaller...
I have seen very very few AWAB hose clamps fail in all of my years. They are a very very good hose clamp......ABA is close as well..... but both...
Also, the best thing for a radar is to run it as much as possible. The Magnetron is only recharged when the radar is actually running, and...
It depends on the length of the run. The longer the length, the more difference that 1/8" will make. Over a 3' run, probably a proofteenth of a...
Actually, that's only part of the problem. I have a customer that has and had a beachfront house there that lived there full time until this year...
I've seen it both ways, depending on the size of the hull vent openings. Europeans like to use 1 in and 1 out, mostly from what I've seen....
Why add another part/fitting into the equation and another thing that could cause a problem when the correct size hose is easy enough to come by...
For this and as a backup, but if I have 2 radars, I run 2 different ranges and also compare signals between the 2.
St. Maarten, nice beaches, relatively safe, good food, casino's and things to do, shopping, pretty, and well safe......A lot of my other choices,...
That is correct. If you are making proper fuel pressure at the motor, then you don't have a supply issue on anything between the tanks and the...
I would not do it. The larger flange will push the wire through the hose because of the extra force put on the smaller hose and it will...
Maybe the French Navy took it out, as a sign to the others who are trying to take their wealth out of France since the higher tax rates! LOL
I would've used a 1/4" Aluminum plate with 5200 on it as a backing plate. Plywood will work for a little while, but it's quite likely the washers...
For the most part the salary ranges are ok. The freelance daily captain rate is WAY TOO LOW. I also see a few others that are too low, such as...
