I recieved mine as well and the shirt is great!
If the computer gets below a certain voltage, it might not be enough for everything to run. Mercury optimax's are that way. Another thought is...
Highly unlikely that you're going to find a used one. However, it shouldn't be too terribly hard to have one fabricated out of fiberglass without...
The chillers are quieter. They are also a pain in the butt on smaller yachts. Every a/c unit is stuck with heat or a/c, but not both, just what...
Is it a vaccuflush system? It is on the rare side that a hose leaks vaccuum such as that. If it's vaccuflush and the pump is cycling on and off...
If the other sea strainer for the a/c is the same size, take the basket out of that, try it in the empty sea strainer, then take it to the store...
Most all of the Hatteras MY's from that ara and (even some current ones) would have a fitting on the bottom of the bow tank (which is physically...
The bow portholes would have a tendancy to leak or develop a leak behind the vinyl wall covering in the foward stateroom and it would run down the...
Use up all of the fuel. If you drain the tank completely, then let it sit for a week, the algae should all die. I'm not sure if you'd need to...
I run a 62' Sunseeker Predator (which is an express). Helm visibility is on poor side, but not as bad as some other yachts I've driven and there...
They usually have a shutdown solenoid that might be bad.
My name does not come up on Google in any way, shape, or form! LOL
You can also snap off the part that turns the raw water pump as well if you turn it backwards. As for the OP. I would yank and check the...
I've found that the Raymarine monitors are very good in full daylight conditions and easy to see.
A trama like that could definately have cracked a few of the flywheel bolts. Especially if it was enough to bend a shaft.
I knew someone who had Scania's and raved about them. However in the US parts and service are very hard to find for them.
Lubricated threads (with the proper lubrication) always give a more consistent and accurate, torque. 180-194lbs on 9/16" threads is a...
MTU tries ANYTHING to try to get out of warrantying a rebuild I had a set of Series 80's, that had 200 hours on them and were under 2 years old...
They're great diesels. Parts are reasonable. However their horsepower to weight ratio is very poor compared to others, making them a poor choice...
I agree, new bolts are a lot cheaper than having to replace broken bolts.
