I had a totally different issue recently at the Hyatt in Savannah. Showed 236 volts on the panel, if I drew more than 35 amps off of a 50amp cord...
A friend of mine just had the inside of a 13' Boston Whaler done by them. He is happy because it covered up a lot of flaws on the inside of a...
Stick on lettering seems the best route. Yeah it will only last a few years, but can be redone rather cheaply.
I agree with the other posts. One other thing I've seen and it's a very very rare occurance. If the cutlass bearings are really old, I've seen...
Make sure to stop at St. Michael's on the eastern shore of the Chesapeake. The harbor is beautiful and stress free. Many beautiful little shops...
60' in your area should not be a problem for dockage. I find the breaking point of getting harder to find dockage on the fly to be over 70' and...
St. Michael's Maryland is a beautiful stop on the Chesapeake. Baltimore inner harbor is nice. Tangier island is an interesting stop (virginia)...
The one I was looking to replace has been welded and seems ok right now. If both of yours are busted, I would highly recommend going to new...
Of the ones I've come across, most things on the boat do not appear to be well made. Also many of the exterior hinges and latches appear to be...
Divinycell or coring would be a much better choice for hatches than Balsa. Balsa soaks up water like a sponge and if you get any and I mean any...
There is some validity to going the rebuilt route also. However, many have not been rebuilt properly or well and many owners are not knowledgable...
I agree with all this, but many people see a Ferrari or Lamborghini as the benchmark super car or sports car...(neither are super reliable).. like...
You could be. It shouldn't effect the water heater, but could definately burn out air conditioning compressors. It shouldn't effect the raw...
I think the top roof are solar panels....just underneath the engine??? How about a floating blimp/yacht. You could take on ballast air to sit...
But, people pay it. I looked at a new 38' Intrepid with a little cuddy cabin and twin yamaha's new. It was just under $700k, I couldn't believe...
Or could've been the dealership owners private toy. Also each Brunswick boat manufacturers president gets a boat to use as their own, so it...
You also need to know how to use an Alpha Laval and adjust for the specific gravity of the fuel you have. But it would be a good thing to have on...
In the past year, I've taken probably around 100,000 gallons of fuel all over the US and the Bahamas. I have not come across any dirty fuel at...
Now this might be interesting technology for fuel efficiency on certain boats designed around it, or even for introduction in a single engine long...
It sounds like the tech wired your AIS power to your radar possibly. So unless your radar is on, the AIS doesn't have power so it cannot send a...
.jpg&contenttype=jpeg "Click for Abeking")