Half shell raw bar has a baked lobster stuffed with crabmeat that's amazing. Ricky's blue Heaven has awesome food also....... Unfortunately the...
A major overhaul? Engine access is going to play a key role there. But to do a major, rebuild the turbo's, injectors, injector pump, clean all...
Jarrett Bay is a good one, just North a touch of Beufort.
I think that a little politics has to be involved in certain stories.....Such as to answer "why hasn't the boating market totally rebounded". But...
Your plan to live on her sounds fine. HOWEVER, being that it is a wood boat you are going to want to haul the boat and have it bottom painted,...
Which is exactly why they cannot build the 51' and 58' Sedan Bridge. The Palm Coast plant simply doesn't have the height to finish the boats or...
Since Brunswick sold the Merritt Island, FL plant to Bertram, they don't have a facility that they can build a large sedan bridge in.
I would install 2-8d's that you can run 1 battery for each motor, and parallel them if need be. You never know when a battery gets a dead cell,...
I've poured a few gallons of water in the motor and then poured the correct amount of powercool for the whole motor and topped off with water,...
The Cummins/Onan is a great choice in that size range and a rock solid generator. Another great choice would be a Northern Lights. Wear parts...
Look at the names of the 2 that are listed under "without antifreeze" Powercool Plus 6000 is the most used brand of corrossion inhibiter for DD's...
The one I ran was a 2012 I believe and had the new MAN 800's and arneson drives. I believe the cog was way too far back and even light on fuel it...
That's your best bet a lot of times. When you fix and rebuild 20 year old junk, you tend to still have 20 year old junk.
I would highly recommend going with the Detroit Diesel antifreeze specified for them and the rubber o-rings for head gaskets that the 92 series has.
Detroit Diesel is the only place to buy it. BUT, Being in Alaska you're better off with the coolant designed for the 12v92's and not Powercool...
Seriously???? I ran a new 55' Uniesse (with arnesons) from Fort Lauderdale to St. Maarten about a year ago. The boat was brand new and...
It might be a possibility to load it onto a freighter in Lake Ontario going to Australia or even Savannah. GA where it can be loaded on another...
I agree currently and can think of half a dozen great yards such as Lurssen, but at the time this yacht was built, it was the gold standard.
Check fuel pressure. I believe those motors have 2 fuel pumps. If one goes bad it will have enough fuel supply to run at slower speeds, but not...
Not when you're going in one direction or know your exact burn. If I'm taking a boat up the coast, I figure my range on 80% capacity, if the...