The 39' Eastbay never came with C12's or C15's, the 48' Eastbay did. You've got me on the cat book with the years. It does have the year thing...
It depends. Some DD's like 12v71TI's run pretty clean at 1000 rpms. Whereas JT 12v92 TI's don't run clean at lower rpm's. Also if the motors...
the 45' Had 6v71 TI's, Johnson and Towers.
Your facts are wrong. Cat recommends cleaning the heat exchangers/aftercoolers every 1000 hours, not by years. Man requires it every 2 years,...
Cat did have aftercooler failures on those motors. However, CAT stepped up to the plate and covered them under warranty (even if they were out of...
71's have their place. But the modern diesels such as the CAT's, run so clean and smoothly in comparison and a lot more HP in a smaller package...
If you think that's bad. On a lot of the Ocean Yachts SF, you had to completely unbolt the generator and rotate them almost 90 degrees to change...
Yeah, I've seen 6-71s that turned 2600 rpms, and I think some even turned 2800 rpms if I'm not mistaken (J+Ts). I don't know what difference...
I'm not too familiar with what brand of Kayaks are better than others. However I see a lot of yachts your size have brackets or cradles made and...
Which brings about the point of why have them in the first place. The TI's are a much better engine. It's like the short life of the 92...
I would recommend getting the parts book diagrahm from D.D. for 671 TI's and changing all of the parts that are different. Or finding donor...
Everybody worried about Y2K, and nothing really happened......So everyone worried about nothing.
If you have to worry about bugging out, you might as well not live. It's such a ridiculous thing to worry about, and I don't think you could...
The 50C cockpit is 125 sq feet......that extra 2' does wonders for being able to fit a fighting chair. The width is the same, the extra 2' is in...
Gas inboard parts like zincs are cheap. On a typical survey, you'll do a compression check, run them at cruise speed and check all 4 exhaust...
I wouldn't trust a hydraulic system from 1986 unless I physically inspected it and knew it's history, as well as when the last time the pump was...
If the pedal assembly goes too far and hangs up, it's in the pedal assembly and that's where your leak is. The rod gets bent when it's pressed...
I only seem to get about 3 years out of my Ford Expedition batteries down here in South Florida. The summer heat takes it's toll on them, as well...
The rules come with a s/s strainer that is inside of the pump base, you need to clean that often, or just take the thing out.
Do you flush the watermaker every 2 weeks? Is your carbon/charcoal freshwater flush filter changed frequently (every 3-4 months)?
