And many times the leak is in the coils and the coils are sandwiched inside the fridge and you can't get to them. Once in a while you get lucky.
Adding engine room strainers, IE Perko's or Groco's on top of the grate type strainers really helps sand to drop out of the raw water into them if...
You could try that, but mold assembly will be frozen to the side and to the coils and I would really hesitate to do that as I would think you'd...
50-55' is a little big for your first boat IMO. I would recommend bare boat chartering a few yachts and different styles to get an idea of the...
YES, you need to evacuate the system, replace the ice maker mold then re-charge. If you don't the coils all expand and you cannot get the new...
NYCAP has good advice and I too echo looking for quality. You really need to figure out how fast you really want to go, and what activities you...
What about just plumbing it and using bilge blowers to circulate air in their?
I agree that you can't lean against an angled bow rail for comfort, but most cases you can lean/ brace yourself against it for docking purposes....
Well you did want to monitor temp of the engine room right? Well the bilge water temp will ummmm get you that temp, just maybe delayed a...
HTM- that makes a lot of sense. Keep it less accessable to get any valuables and small items off first. I'm sure there is still a lot of...
You won't get a readout for temperature because it's not submersed in water. That was a transom mount transducer and is why it has that integral...
If EVERYONE in the U.S. simply paid a 10% tax on everything, we'd be a lot better off both financially and hassle wise than with the current...
Most sailboats would roll right over if you launched them without the keel on them. The boat wasn't ballasted correctly and underballasted or...
There are better photo's of the bow and bow arrangement if you look at the photo gallery of the 64'. There you can even tell that section of bow...
The Astondia is not the bow nor the boat pictured in Post #1. This is the sistership of the boat pictured in Post 1, I believe Azimut 70:...
What question? The deck barely slopes. The cap is what slopes while the deck is pretty much level, which gives it the illusion of the deck...
I think if you simply follow the manufacturers maintanence schedule, they're all pretty well laid out by both hours, fuel burn, or time (years),...
You're changing the goal post. I agree with everything you've said here. The problem is our Corporate tax rate is too high, and one of the...
I agree that Carnival learned very little from this. Part of it is the fault of the public. They keep taking Carnival cruises and keep paying...
Almost all railings are outboard of where your feet can be and are mounted on the cap rail and not the walkway so they are not a trip hazard. The...
