I do a bit more than NYCAP as a Captain and fix whatever I can on a trip to keep going without having to have a delay waiting on a mechanic. I'm...
Given Marlow's history of ethics regarding lawsuits and such I'd steer clear and find a different builder, or hire a very good attorney.
I don't think 37.5 is accurate with just a pulpit. I think that measurement includes a pulpit and swim platform. If the boat itself is 34'6...
Can you hinge it at the start of the opening where the anchor pops through and get to where you need to be? That way the part the anchor rides on...
She's looking for a job, not to be an owner. Judging by her screen name she's looking for adventure and etc. You know another option for Kate...
Strataglass wins out over poly-carbonite. The poly carbonite does not bend well and only works with flybridges with square lines and a hardtop...
This, usually if the motor runs and it fills faster than it drains. Like Rcrapps said, the stater and rotor is bad.
They really won't let you dock it with the pulpit? The only thing I can think of is a folding pulpit, then you have to reconfigure the bow rail...
It's possible to get a job as a stewardess on yachts, but your options are going to be a lot more limited at this age. The stewardessing on a...
No, they do something. They clog your secondary fuel filters with the algae they macerated into finer pieces that goes through the racors and...
Check with Depco pump and see if you can match it up. Another option is to look at the impellor and see who sells it (jabsco, sherwood, etc.)...
I've also seen on several yachts, those primer pumps that look like a smaller black coffee can cause air to get into D.D. fuel lines. They have a...
Never used it, and have been less than thrilled with most of West Marine's cleaning/protectant products as they seem to be 50% watered down...
You are correct, and I miswrote and was incorrect. However, that is neither here nor there in regards to the OP's problem. If a cylinder has low...
Yeah, call the local Detroit Diesel dealer and have them come out and diagnose it.
It could be a bad connection at one of the shorepower inlets, given the age and if they've shown signs of overheating, it's most likely the culprit.
They should still atomize the fuel the same as the fuel pressure in the injector and line is the same regardless of compression, that comes from...
You can tell pretty easily with the valve cover off if a cylinder has low compression from the fuel injector on a Detroit both in noise and feel...
You might also be able to tell if you have a dead cylinder just by running the motor with the valve cover off. Usually the injector won't actuate...
As to the OP, you can find one through a good broker usually is the best way. Word of mouth is always best. The other way is to dockwalk, find...