I went with a tri axle 14,000 pound trailer , my boats single engine , going off memory my Roamers approx 7.500 - 8,000 pounds
I am trying to get quotes for a new trailer and was wondering if anyone has technical specs on weight? It is a single 283 inboard, steel hull 1958...
Does anyone know status on the other 25' express cruisers .. I thought there were three floating around .... but after looking at pictures on web...
I just realized that the three pictures of the 25' express cruiser ice breaker is mine. I purchased from a guy in the bay area that striped paint...
Hey JB Regarding weight I am not sure have been guessing between 8000pds to 10,000pds I bet someone on here would know better than me, below is...
Sorry these took so long I have been working on the cabin, I didn’t realize I missed so much action here. As you can see with my color scheme this...
Lifting my roamer I lifted the boat using five 20 ton jacks, I would secure the trailer to the ground on the port & starboard side, then lifted...
Ice Breaker Update I completed my epoxy primer coating, my anti fouling coats and inside hull epoxy coating. I am doing all my wood restoration,...
Wow Erik .. thats an amazing tranformation, i am hoping my boat is going to come together as good as yours. Here’s the update, I had all the bad...
Reality as kicked in and it looks like I am going to be cutting some rust out. I’m sure I will be asking for more help Thanks for the info ~Billy
Thanks for the info, I went to my fabricator this morning and we discussed the different repair options, it left me a little concerned about...
It is rusted inside also but only seems to be near the front keel for about 24" long and 8" high on both sides, i'm thinking that the steel could...
Sorry about the picture, i was having problems resizing after the text overlay, Thanks for the correction. ~Billy
Thanks for the replies, The rust you see in the last picture is all surface rust, the person I bought It from prepped the boat for primer then...
Hello All, I recently began restoring a 1958 Roamer 25 Express Cruiser, I chose to sandblast so I could be as thorough as possible and what I...
