From the manual, other than diagnostic work; Note: Do not open the cooling system when the engine is at operating temperature. This causes a...
I have the .126 sensor in hand (pressure after pump). I can get you a .125 but you have to promise to take a heart pill before I can quote it....
Depending on the installation, you can always get to one of the caps. Yes, they are different size also (L vs R). On the sensor, With a...
Green wire is still separate from the ship at point E (bottom left @ x-fmr). Then to Item E (by-pass box), then to transformer case and ships...
Please send me a PM in a few days. I may have something for you. ,Ralph
Yes. The grounding relay is a newer thought and future isolates the ship from the dock. Future inverter theories involve an open green wire...
Let's get some info; What engines? WOT Rpm? Are your wheels in a tunnel? Two piece shafts? Big RIB on the stern?
Can you determine if the whine is closer to the flange or shaft log? Is this a new noise or always been there? ,rc
Ah, I forgot; The Princess Bride. Can't go on without references to Dread Pirate Roberts.
Good catch on that lead. I missed it. I would think there would be a software update available like the Raytheon RN/RC3XX stuff. That last line...
Maybe not from backing down but a stern wake from chopping the throttles quickly (in forward motion) could be a culprit. That's a serious down...
The GoogleEarth images are depressing. Miles of beach covered in scrap ship hulks and less.
I messed up & missed the 54Donzi Part. My examples were for smaller boats. We have a 58' Bert with the same stuff. Heavy tab use and never had...
What king of break? Bend, compression or tension. Bennett Rams are pretty tough. It does take allot to break them. I have witnessed the...
If it stinks, it's leaking.
Once the hose starts leaking the odors, the hose will always permeate odors and eventually fail. Yon can not clean or fix a damaged hose. You can...
Ah, the Blue Hair plan. You need a Hopper Barge for that. Bingo below,,, until your well outside...
Gas engines. Cast iron risers, cast iron exhaust elbows and depending if your exhaust manifolds are raw or coolant cooled, maybe them. Old Cris...
Low hours could be good. Real low hours could be bad. These same thoughts have been argued before on this forum. Do some searches and you can...
1991 @ 800 hours? Since MOH? Hours in the last year or two? 2 strokes need a good survey.
_2.jpg&contenttype=jpeg "Click for YF Listing Service")