Thru the years of bashing the stuff, I finally gave up on fixing the lil parts. If your unit freezes water quickly then just get another whole ice...
Their usually nicer after they are OUT of office. Cruel, Cruel. It's a lost, poor, abused Bertram. She don't know better. Call the owner names,...
You would have to say Bertram. Think I need to start a Bertram rescue pound. AND, Ole Berts with leaking chargers (old Raritan), old water...
If all are bonded, the size of the zincs may not matter. There is one site that suggest total weight of zincs per alloy boat....
That's .923 volts. Almost a whole volt. 11 more and you can start your outboard. I would be concerned. Get off the dock and measure again.
Find a dawg tag machine and have the previous names printed. Also print the new name. Neptune and his partners don't like the cheap stuff, (mid...
Oh hail, yes I ment hair.
AND, I had a case where hail had restricted the hose. Pump never could over come the restriction to get primed real well. Just like Mikeyersir was...
3700 may be a bit large for a small sump. Also, if you're using a smart or electronic switch, with a delay, you will have this problem. Never put...
With the loss of 2 last year, we have thought getting a (next) BIG kat. We have met a few on the docks thru the years. There is a large Savannah...
Guessing out loud here; Unstrap all bonding and green (green/yellow) wires from the tank. Measure for any voltage from the water heater to ships...
I'm on the correct page now.. The other kat is our gravity device. She holds the furniture down. She also has a set of hip-mo-tizing eyes. She...
Not sure how to read this,, I'm the one standing at the helm..
Well excuse me,, if it was running per Carver and Merc per that vessel- Why are you asking us anything?
I'm still thinking stray currents causing runaway thermostats & then stray currents on damaged/open elements.
Hummmmm,, Radioactive water? High minerals? high carbon or acids? OP has stated he injects chlorine and the system cycles the water as like a...
I'm guessing but are those thermostats and pumps on the element ends? Leaking current from them to the elements could be possible. I would assume...
4400 may be just a lil short already. Could you already have a cup in the wheels?
Can you fill us in a little better; What reduction, 3 / 4 blade, wot rpm, cruising rpm you run at now, how much more weight will you be adding to...
