Follow up... the outlet in the first picture is a 3 phase 480v outlet. According to the manual the Atlas system can handle 480v three phase....
I may do that. Still trying to ID that 4 pin outlet though
A couple of days ago, we moved the 110 back to our regular slip after the pier was rebuilt incl all new electrical turns out the brilliant...
We often speculate on the cause of accidents but rarely hear when the report comes out. Andiamo was a 120’ Benetti that went up in flames and...
Great video! Thank you. I had never seen it.
Yeah empty and refill. Empty and refill. As many time as necessary. How old the boat ?
Never used one but head hunter always makes quality products
Most diaphragm pumps like the shurflos can be a little loud depending on how they are installed. The grundfos John suggested is pretty quiet...
When you say gas, do you mean air or is there a smell? what kind of water pump do you have ? If air gets sucked in the pump, it has to be...
That’s indeed going to be a $1M+ project... if you love the boat and intend to keep it for a long long time that’s fine otherwise you really going...
The manufacturer or any good hydraulic tech should be able to add a valve to slow it down. Nautical structure did that to ours a couple of years ago
i had 2” AQ22HS machines by by local prop shop when I repowered my 53 Hatt 3 years ago. I forgot where the stock came from... I also had some 3...
Comes in every diameter
spot on. The 116 I started running a few months ago has a single stage TNT lift which doesn’t raise the platform high enough. When accelerating...
[ATTACH] Make sure it s AQ22HS (high strength). The prop shop should be able to calculate the safety factor for the shaft and make sure it is...
Define flooded... how high did the water go? Salt or fresh? If there was significant amount of water inside, it s almost never worth it
I could be bad or dirty fuel but the filters should handle that. check the fuel pick up as well as the anti siphon valve on the tank. They get...
I agree. It’s likely to be the heat exchanger which is easy to test and replace if needed. If original, 30+ years old. it could also be the...
I always have a spare pump on board. Always. And impeller of course.
When I repowered my 53 Hatteras with C series I had a good prop shop run the numbers and the result was spot on. if your existing props are way...
