Coinjock never impressed me. The restaurant is ok but never understood what the fuss was about. i usually bypassed it and just anchored in the...
nope.
Problem solved. I got a 4 pin 100 amps 480VAC male connector from Wards (excellent service as usual) and installed on one of my cords removing...
I like the 58 YF. I have a 53MY which is the same boat without the cockpit. Some days I regret not having gotten the 58YF but aesthetically I...
This is how I mounted them. I used 1/4 starboard which I bent after heating it. Simple but a little flexible. I’m adding a 5th one for which I...
Well this boat has an Atlas system which is designed to accept various voltages, nr of phases and frequency and automatically output the 240v 60hz...
On my 53 MY the first thing I did starting the repower and refit was the bilge pumps. I installed four rule 3700 with rule float switches plus an...
The two cords are 5 pins 5 wires three phase capable of supporting either 208vac or 480VAC. The main breakers on the boat where the cords come in...
Yeah. What is weird is that I don’t have any 4 pins 480VAC adapters on board. I have the two odd ones I first posted but not the one I need......
Re reading your posts I m a little confused. Are you going to be the captain or the general manager. I understand full well that a captain is...
Thank you got the replies. Yes indeed. I m now starting to understand this better and as mentioned the table found at the back of the Atlas...
As I said earlier I tested the outlet and it is 480VAC 3 phase which the atlas system can accept. As evidence by the thread title I m no expert...
In the US on a US flagged boat all you really need is the appropriate tonnage license. If the boat is 99 GT your 100GT master is enough. AFAIK...
I never mentioned 408vac.
To clarify: the boat has isolation transformer in the Atlas system and does not bring Neutral on board. Same with the 84 which had a Charles...
Thanks I did find mention in the manual that voltage must be the same for both cords. Can’t mix 208v and 480v. Makes sense I also found a...
Our chillers have three loops. Couple of weeks ago one was running 15 degrees higher. I was able to back flush that one and temp went down right...
That 4 pin red outlet is 3 phase 480 according to the marking I found on the side. Hard to spot but once highlighted with a sharpie it was...
With both cords plugged in 208VAC 3 phase, the Atlas system boost it to 240v single phase. All good. Actually the input meters on the Atlas show...
Final post on this... even after all the cleaning and making sure the pump was on top shape, I was still getting occasional tripping on the...
