I've got a train of thought on this topic. If I use plastic, I handle it properly, dispose of it properly, never abandon it to nature. No, I...
There are small, typically european appliances out there. Just have to search and review comments, reviews, etc. Posting a concept link only,...
Maybe we're challenged to routine vinegar-water solutions being poured into these pans routinely as a prophelactic remedy...I would have thought...
YEs, my maintenance routine has been using my custom tool on one drain while restricting the second drain with a rubber cone on a wire. It's a...
Can you plumb in a sweep there to eliminate the 3" horizontal?
Only if your windows are screens.
Thank you. I've ordered with a plan to place one at each drain, which for me is two per pan.
Yeah, I'm going to give these a shot. Don't really understand why someone would want to pay more for a two-pack order versus buying two packs,...
I've designed and built a hose with a cone tip on it for attachment to an air line I can run from the compressed air system aboard to blow out...
To avoid flow restrictions I oversized by one size. I cannot think of a better way of handling this flow, at least through the engine room....
...used reinforced hose, double clamping, and Armorflex at the air handlers.
Majority of my project was built out using GF Coolfit. Really cleans up and simplifies the project. Implement occasional rubber hosing to allow...
...I'm wondering if I was the target of some tech playing with the system...
Well, thank you. I already have a YFY shirt soiled in my engine room somewhere. I don't think the acronyms represent the same words at all...
I agree. I wouldn't rotate them (mine are 252's). Just pick up some self mixing tubes of a good 2 part epoxy, drill a hole, maybe 1/4" or 5/16'...
I found a sweet spot with Chiller 1 set 44 to 54 and Chiller 2 set 49 to 56. System seems to find on most days that it only cals for Chiller 1,...
I think I have about 150 lbs of various brand new bronze fittings in a bucket. I use it for ballast.
Good to know on the Bruce. Had issues in similar conditions with a plow and lots of chain. My math mind wants to think that the plow likes to...
A vendor I have used for work on my systems: NCH Marine, LLC 11325 SW 28 ST Davie, FL 33330 US (754) 422-4237 Larry Hill
There's some work involved. I don't think the price to be unreasonable, but more critical is the reputation of the vendor. Check the fins for...
