As you have pointed out many times before, there is no access from the deck to recall the fenders on some new designs. Further issues include SFB...
Heat on the shaft, Replace that front seal for sure now..
Pascal was here before on his previous work boat when he took it over. Fresh sensors all around I recall took care of it. I remember going around...
I had to download one of the original pictures from above and zoom it in real big. Post #1, JPG #2 The negative leads etches are tied. 2 wires to...
On power on, it assumes the feedback unit is there, but when it moves the rudder and no change in feedback value, it logs the error. Depending on...
Usually not much iron for a magnetic dial base to mount on in a bilge. I use a heavy scrap iron plate sitting in the bilge. Also had a metal tab...
Very good point. Never allow your gen-set thru hull water to be forced or scooped into it's raw water system.
Should be the same key as when the coupler was surfaced. Could be just assembled wrong or differently than the machine shop.
Jelly-fish are just a bog blob. They will clog any screen, inside or outside. The outside strainers could be helpful on self clearing while under...
Before I really start calling the captain in, I have to ask some questions; When asked about speed, Was in kts or mph. Sales people luv MPH, real...
