In addition to looking for specific leaks, blockages, etc, if you want to invest in Denso tape, I have used it to wrap sanitary flexible hose that...
If you're sold on a hoop style anchor, you might want to check the Manson Supreme. It performs about the same - better sometimes, worse others -...
That's not a boat. That is a hyperbaric chamber for an Orca. And we don't design boats here in Anacortes. We just take them out for a roll...
The video shows her bobbing in the water on her side. At that location, there is plenty of water, so the idea that she rolled over on the hard is...
Perhaps this, like so much other information you get from others is wrong, although my source seemed to know what was discussed by others working...
You are quite right. Befuddled between gallons per cubic foot and weight per cubic foot. I used 25' beam on an 85' vessel for 2,125 sq feet,...
We moor next door, so information is starting to come out, and while final conclusions should await the information that will no doubt come out in...
It might be an optical illusion, but once I measured it, Baden's height doesn't seem that much greater than her beam. Did I understand AMG and...
I think if you look at the windlass manual, they all recommend against putting that load on the equipment. If properly backed, a cleat is going...
Chlorox Clean-Up, which seems to be dilute bleach and something like 409. I use a cheap garden sprayer to wet the deck, then use a long handled...
We weigh around 65 tons, and use a snubber whenever we anchor. Quieter, and it moves the load from the windlass where it doesn't belong to a...
Bit late to the conversation, but I guess you start on a forum some place. The Ultra has a horizontal reinforcing bar inside the shank to...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")