Yes, the gauges are common over here. You don't see them due to your yachting regulations, the same as how you guys have metal bowls on all of...
It doesn't matter WHAT primary fuel filters you have, with clean and appropriately sized filters/fuel lines/fuel vents generally every single...
Congrats. Did you happen to look at the engine room at all? There isn't enough room to get your body forward of the back of the engines...
I run 10 micron primaries, I've seen 3 newish boats where the 30 micron racors looked near perfect and the secondaries were plugged to the fact...
How long did it last? On my friends boat they did the tables and decks, but supposedly just wipe it on with a rag. I only found one posting of...
It depends on how far, remote you travel. Raw water impellers, I've never seen the need to carry spare air filters, a boost sensor is good to...
A friend of mine works on a boat and the owner had it done before he got up to the boat in NY for the season. I've never heard of it, so was...
So a friend of mine was telling me about this Triton teak sealer that a contractor put on his teak decks. They just put it on a week ago, so the...
The problem is Fort Lauderdale charges a fortune in permits and impact fees, but hasn't been maintaining the sewer system. The problem with it is...
I managed one for a short while and managed and ran a 62' Flybridge for a long while. It was stretched from a 57' I think it was, the cockpit...
THIS. But if you're getting a TPS code that probably is the issue and the TPS (Throttle Position Sensor) should be changed.
Some rental companies will only allow you to drop off a one-way at an airport location. I believe most will allow you to pick up from most local...
Time to get a CAT mechanic out to your boat. Between this and the gauges, you have a wiring issue on your engine. A good CAT mechanic can...
You can find a one way rental if you search hard enough and book from an airport, that would be my recommendation. It's going to be just as hard...
Do you let the engines warm up to 140F at normal idle before putting them in low idle and starting to leave the dock? Allow the computers to go...
There's always ONE (idiot). My customer made it safely to his marina in Northern Michigan 2 days ago and is happy.
Pascal, yes. On the 76' Lazzara the forward fins are midship, or even aft of midship, and the rear ones are not that far forward from the stern,...
Given the location of the stabilizers, ask them how much noise they generate during zero speed (at anchor) of the electric stabilizers. If memory...
The 3208's I recently dealt with on a Black fin, the motor had a wiring harness, it had 1 plug with around 20 wires on it, then the wiring went...
With 3208 cats, my guess is it's at the wiring harness plug. I just had to fix an issue there on a boat of similar age, pins in the harness...
