First you have to drain the fuel!!!!! The saddles gravity feed into the center, and I don't think (can't remember) if they have valves to shut...
Fuel tank is bad. Center tank always is the first to go, between being really close to bilge water, any water/condensation in the saddles always...
WHERE is it leaking from and what seals do you need? Model and serial number would help. Emailing a Kohler dealer would be your best bet.
He didn't. He likes doing "cutlass bearings the hard way" rather than freezing them for several hours so they contract.
How much is your time worth? LOLOLOL. I bet that machine shop would've pressed out the old cutlass bearings and new ones in pretty fast and...
The key is having the fish box (and lid) well insulated. IN that situation the ice makers are great when installed properly.
Pull and Inspect the shafts. Put the Cutlass bearings in the freezer for a while.....then install.......
Generally they should leak out the weep holes when they fail and not in the crankcase, but if it severely ate the bearings, it's possible it could...
I ran a boat that had the first generation. Owner had the boat for about 8 years and it still looked perfect. Owner's mate used the cleaners...
It's a shame what happened at Southport marina. The good news is it does look like all of them are still floating. I prefer to be in the...
Really, so many factors change in 5 years, that it's somewhat futile to narrow down price and what's available now at that price. I would go to...
Generally Sportfish have the galley in the front of the salon because the front of the house has no windows, so it's a perfect place to put the...
I'd go with Flexi teak. It's been out forever and has a good track record. If simply cleaned with the right products, it lasts. It does get...
??? They just did by building the larger locks, next to the old ones. With modern medicine and machines, all else that would be needed is to dig...
If the raw water pump is gear driven, perhaps that's how the water got in there......if it ate the shaft bearings......she might get lucky.
The second one is the color on a lot of Paint manufacturers "Fighting lady yellow" these days, straight out of the can. I like it in the pale...
It all depends on how hard the prep is and how hungry the yard is. But this was done by a very reputable yard in Ft. Laud that's been in business...
You need a Hinckley dasher!!!!! :D
You asked about how they did at max speed compared to tabs in the same boat. In my situation, the max speed number was irrevelant because the...
As cheap as they are, order both!
