Not all motors are factory market. CAT's and Cummins are marked by the installer and replacement DD sticks come blank and have to be marked. A...
Have someone press the stop on the other engine a bunch of times when you're in front of it. On detroits it's generally right on top of the motor.
Yes, but they were able to build the new ones in today's day and age in a timely manner. So given that, I don't think they'd have any issues also...
They're not bad boats by any means. They just have the Taiwan inconsistencies and lack of thought to maintenance issues.......Tiara made a 50' FB...
Not even close. Tiara is a quality boat for it's size. Mckinna is an average to decent quality boat. Hull and build is strong enough. Not an...
They did make 8v183's and the lower HP version would've been around 650 HP, that would be my guess is that they're either 8v183's or the listing...
YEAH, call an MTU dealer. 650 HP does sound very low for a 12v183, most of the ones I ran were 1150HP.
I've never seen Pamlico 4-6' and that was with 20-25 knots wind, I've seen 4' in there maybe occasional 5' but was going with it. The issue is,...
There should be a small breaker panel in each stateroom closet. Otherwise they were under the helm in the row of breakers.
I ran a 45' Cabo with a 1000 watt in hull. It worked good for fishing. I didn't have any issues with it.
That would make sense as the main tank is under the cockpit floor and I believe the saddles are outbound of the engines and there isn't a ton of...
NO. The other heat exchanger is sized to cool off whatever it is that it's already cooling off. Fix what you have properly.
This, I've run Pamlico sound with many boats. Set it at cruise and sit back and adjust the autopilot every once in a while........No issues....
Always test run small motors on a bench, before you install them! Saves a lot of hassle later. Should put assembly lube on that area of the...
Aside from checking your return fuel line. Check/change your vent hose and make sure the vent is clear. If both hoses are origional, change them.
You need to take the cable that's going from the port throttle to the glenndenning and go straight to the engine with it (may require a new longer...
It's a Florida thing. I don't like it either, but most owners expect it.
Check your fuel tank return lines.
Bottom paint.....can even use bottom paint in the spray can......first see what drill bit size is just a touch smaller than the holes.....As...
What boat are we talking about? I've used them before, you do lose some power shooting through the hull, but if they're in the right location...
