It’s been a while since I be run north but that section of ICW isn’t bad. running outside is fine if the weather allows you to run on plane,...
Glasstech is a pretty good yard. I haven’t had any paint done there but I be hauled out a couple of times. In fact we re pulling up the 110 next...
I have some 3/4” but I think they start at 5/8”
$1600 for small props? Expensive… that stbd cutlass bearing is likely to have been tight for a while. Again, if you had hit with the starboard...
Btw nobody mentioned megabraid lines but they are ideal for traveling as they are more flexible and coil much better.
It would have to be a crewed charter on bigger boats but then why not just charter a boat and rent your villa…
That happens sometimes. It can wait till you get home.
Vero is MM 950 on the ICW so that’s about 830nm. 10 hours a day at 8.5 kts hull speed… it s about 10 days to Norfolk without vibration. Figure...
Sorry to hear about your troubles. The stbd shaft could be harder to turn because of a tighter cutlass bearing. does your survey mention...
Glad to hear! Ross and Cindy, Hope you have an uneventful trip!
I use 3/4 double braid on my 53 in my home slip. Never had an issue even in 50 kts squalls. For raveling I use 5/8 and they’re lighter to move...
Also check all The connectors and plugs near where he worked. Something must have come loose. the proper way to flush and clean the raw water...
Unless your strainers are above water line, which is very rare, you can’t open them without closing the sea cock
The no data error sounds like a disconnected connection, likely near where he worked I m really confused by your description of the flushing...
That s why I try not to do any work right before a trip unless absolutely needed Don’t know what the mechanic disconnected to flush but could...
12 pax, 5 crew… hopefully had a big holding tank :)
Barnacle buster works pretty well and it a not as corrosive and nasty as muriatic acid. Not familiar with Bright Bay. the easiest way to do it...
It’s not just the outside temp but the water temp as well. If you re on a canal or closed basin chances are the water is hotter than it would be...
I agree with Ken. what is your budget? Smallest crewed boats in the exumas are around 60’ / $25k a week with expenses. or you can bareboat a...
Don’t let a narrow canal intimidate you…. I mean it s great that you re seeking assistance but once you get over the “oh s - - t “ this is big...
