Most likely the sensor.
No idea. I've never used Rust-oleum varnish, but for what varnish costs I'd rather use a marine grade varnish such as interlux.
Yeah, but you've got a whole lot more boat to deal with!
I'd stay with a split system, and replace all of it. The freon is now R410 and wouldn't re-use the old copper lines, air handlers or anything....
You need more crew on a boat that size. Should really be running 4 if doing charters. Capt, Mate, stew, chef.
I once worked on this 85' ish foot Maora that had high bilge water (about 10" in center bilge) and none of the bilge pumps working......I went to...
Bury the trim tabs down is about all you can do.
Or the unit is 20 years old and compressor leaking and going bad, which would be my guess.
Get a good hull surveyor and an engine surveyor and call it a day.
What size yacht is it? I've never seen someone call an A/C tech out on a yacht under 100' or so. But basically chillers work as they're supposed...
Use Florida Nautical out of Fort Lauderdale. You're not going to find a "big boat" surveyor on the West coast. CAT can use a CAT dealer.
If they're aluminum, you could have someone bead blast them possibly.
I don't think Cabo is a competitor to Mako at all, not even in the same segment. Also don't see where it would fall into the current...
3208 cats weren't sleeved either and neither are yanmars as far as I know. Removing a 5.9 shouldn't be terribly difficult. Some boats labor...
Generators- REPLACE, there's no parts out there for those 23 year old Onan's, new ones installed $30k each Cruise-airs- REPLACE $3500-4000 each...
It cannot be described. If you know Detroits, you know how one should start and run. Hire an engine surveyor. It's worth it's wait in gold.
It was a 1987 65' Hatteras MY extended to 75. Heavy on fuel 16.5-17 knots. Lighter (1/2 fuel) and in the right location 19 knots at 1900 rpms....
EVERYTHING is a problem on BMW's and NOTHING is cheap about maintaining them. My sister's 2020 3 series BMW is getting the engine replaced right...
I'm regulated to about a 19' boat. I have only 9' between my A/C unit and side fence, and 18' in front of it and will probably have to wiggle it...
I keep kicking myself in the rear. In 2010 I came across a crystal clean, garage kept 2006 20' Seacraft cc with 175hp optimax (135 hours) and...
