How about putting gauges on it and properly diagnose it. Sounds more like a heat exchanger and as you load it, it hits the overheat shut down....
Go look at the 60' Bertram thread and read it. The performance numbers of having crappy props that achieved rpms and a proper set of props are...
What rpm's does it max out at? Big difference at cruise speed with MAN's if they achieve 2350 rpms at WOT instead of 2300 or less rpms. The...
Yes it's plenty fine, but you're best running 1000 rpms and then cruise every 6 hours for 40 or 45 minutes instead of 30 to make up for the speed...
Charters do that so they're off of the deck and out of the way. And you know, in Miami with an illegal charter with 12 guests on board.....it's...
Pretty level. It's hull speed.
1000 rpms will get you 10-11.2 knots. I ran one that had C18's in it and was a great combination. One of the last ones they built. You should...
When you say the filters are clean. Are they NEW? I've seen engines with fuel pressure issues and the filters looked quite good, but were...
Ocean yacht yard in Norfolk.
There are many yards that can fix it. You will never match gray if it's metallic. Just paint the hull, it's not that costly to paint the hull...
West Marine- Manufacturer is BoatLife- the Life-calk (comes in a teak color but I don't like the way this product spreads. BOATLIFE Life-Calk®...
In that era, MAN by a long shot.
Life seal has an off white or almond like color.
No, but if it's a Princess you better bring a large tool box and you'll need to carry lots of parts. One should NEVER run a yacht by themselves....
Look at how cold and murky the water is there!!!!!!!!!!!!
I only find it beneficial on a 35 knot SF where your options are prop speed, or nothing as bottom paint and other choices won't stick. I find...
Yes, your prices are way in the ballpark pascal. A 53'-80' size yacht has been $3-4 a foot here on a monthly for several years. As for $100 to...
Could also be a dirty heat exchanger and it's getting up to the shut down temperature.
What about BURGER? They built an Aluminum expedition yacht around the size you're looking for, a few years back.
Any seakeeper dealer should be able to handle that.
