OK so you are keeping same diameter, pitch and number of blades. So the new props are simply to replace the old ones that have reached the end of...
It's amazing what some builder's do. My former boat, a Sea Ray 39' sportfish only had a bearing in the strut. The shaft coupled to the trans then...
Forgot to mention in my last; Make sure you get someone that knows how to do a proper and thorough blue fit of your new props to your old shafts....
Too bad the yard or whoever attempted first did not have this equipment, would have saved you a lot frustration and concern. This is pretty...
Obviously the key ways being twisted are a contributing factor. Further, as others suggested earlier in the thread I suspect you had an excessive...
Curious why you folks do not install macerator pumps on your fish boxes? I installed one and it works great. The only thing I found out the hard...
Sorry to hear of your challenges. When the guy attempted to remove them today was he just tightening threads/bolts as pulling force or did he use...
As Capt Ralph says, need more info here. What type of material are your shafts? What is your gear ratio? Where are the shafts breaking? The usual...
I have the Globe Surfer III cell based modem. I would say it is marginal at best. It is connected to one of our big antennas and I thought this...
Some good info here. And exactly why I shipped my 54' when I needed to get it from So Calif to Puget Sound.
I went with the Legend 750 modular. I didn't really have a convenient spot big enough for the package unit. The pumps, filters and control console...
As you will see earlier inthe thread, Donzi54 has a Spectra and said he was happy with it. I decided to go with the Blue Water and so far am very...
Wife and my son arrive Wednesday. We head out Thursday for 4-5 day trip
I arrived in Ketchikan Wednesday evening. Got on the boat about 8 pm. 48+ hrs later and I still can’t get the smile off my face. Everything looks...
Seems odd to cut corners on such a vital piece of equipment but to each his own. Keep in mind, the engine may say Kubota but it is not the same...
What gen did you end up going with? Installed yet?
The punch list is getting much shorter with progress every day. All the new LED lights working great. Galley refrigeration up and running since...
I just installed two NL gens; a 9kw and 20kw, both with their Gem series enclosures and doubling the isolation mounts. This went in place of an...
Yes, they have hand fuel priming pumps. We also have electric priming pumps but they are not integral to the CATs.
That is certainly great to hear!
