Every boat is different and depends on what you prefer to do. I typically do not use any rudder for going in/out of my slip. I find using...
I guess if I had Bezos type money I would probably build something like an 80-90 foot Jarrett Bay or Spencer. Then I would have a 300' something...
Possibly an old set screw or something, really I have no idea. Nothing above dripping and the rust is on the underside of the shaft log. One we...
So we did some closer looking at the rust bleed we are seeing is not coming out of the shaft seal, at least not directly. We got in closer and can...
Thank you - much appreciated.
Much appreciated!
Thanks but I’m not going to add flanges to my shaft logs or buy seals that are not readily available and serviceable in the U.S. There are easier...
Did you try to manually put it in forward? This will tell you if you lost signal or similar issue not internal to the trans.
I don’t think the tube is clogged. We checked it when we replaced the seal and it was clear. But that being said I’m not taking anything for...
I had some flow testing done today. The straight supply to the seal from one engine is about 2 gpm. With one engine running, the supply to the...
Ah-OK. Yeah that would be a little unsettling. I thought perhaps your expectations might be unrealistic. Your description doesn't sound that way...
The PSS seals look like they have only one port on each seal. Are you saying you have Tee fitting in each supply line going to the other side?
Can you expand on what you said in your initial post and what you mean by "acceptable heading control" ? Are you trying to hold a straight line...
I was just looking at the Tides online. They even show them plumbed with a crossover line right online. My first glance through their catalog and...
We pulled the hose off the seal coming from the engine and fired them up and there is significant flow going to the seal. We also verified no...
Lew - what brand seals are you running? My previous seals were plumbed the same way and I never had an issue either. I'm already seeing signs...
How do others have their seals plumbed? Tee lines or crossovers? Perhaps most others have a single port so you just tee them together?
Following up on this issue. I sent the failed seal back to Lasdrop for their input. They inspected and said it is apparent the seal overheated. I...
You said it is a "NEW" boat. Where's your dealer? They should be helping you with this
So here’s the latest; I finally got another quote and it was almost half at 1.1% (vs. 2%) and the deductible is 2% vs 5% . So just based on...